Pre- and Post-Production Treatment of Cast Parts
Since April 2009 we have been carrying out pre- and post-production treatment of cast parts through our associate company BHT GmbH & Co.KG; this is in addition to our partners’ CNC work stations which permit the economic production of a range from individual components up to large series production in a weight range between 0.5kg and 15,000kg.In doing this, the employees at BHT GmbH & Co. KG are able to demonstrate both their high level of competence in gear tooth forming and grinding work and their many years of experience in the turning, drilling and milling of cast components.
All the services provided for this work are carried out on the following highly modern, state-of-the-art equipment:
| TOYODA: Horizontal work centre FH 1250 X Table and top dimensions 1250 x 1250 mm |
||
| X-Axes: | 2 200 | mm |
| Y-Axes: | 1 600 | mm |
| Z-Axes: | 1 850 | mm |
| LIEBHERR: WSC 1400 gear shaping machine |
||
| Table diameter: | 900 | mm |
| Working Area: | ||
| Max. Gear tooth forming diameter: | 1 400 | mm |
| Max. Work piece diameter: | 1 700 | mm |
| GIDDINGS & LEWIS: VTC 1´600 mm vertical turning centre (with adjustable crossbeam) |
||
| Table diameter: | 1 600 | mm |
| Working Area: | ||
| Turning diameter: | 2 000 | mm |
| Swing diameter: | 2 000 | mm |
| Crossbeam hight: | 2 000 | mm |
| Additionally from 11/2009: | ||
| VTC 2´500 mm vertical turning centre (with adjustable crossbeam) |
||
| Table diameter: | 2 500 | mm |
| Working Area: | ||
| Turning diameter: | 2 700 | mm |
| Swing diameter: | 2 700 | mm |
| Crossbeam hight: | 2 500 | mm |
| Balancing maschine: | ||
| Diameter: | 1 400 | mm |
| Max. Weight: | 5 000 | kg |
BHT GmbH & Co.KG
Harderhook 35
D - 46395 Bocholt
Tel.: 02871 / 23689-60
Fax.:02871 / 23689-66
Harderhook 35
D - 46395 Bocholt
Tel.: 02871 / 23689-60
Fax.:02871 / 23689-66
